EN 10327 JIS G3302 Galvanized Steel Strip Anti UV Mini Spangle / Regular Spangle

Through electrolytic galvanizing, a uniform and dense zinc layer is finally formed on the surface of the steel, but the mechanical properties of the material are still maintained. Electrogalvanized steel is usually sold in coil or sheet form. EG coil is a kind of material that can be cut, slitted and profiled for other purposes. The steel grade of galvanized steel consists of base metal grade, galvanized (E), galvanized layer type and weight. The electro-galvanized products based on SPCC, SPCD, SPCE, SPCF and SPCG are named SECC, SECD, SECE, SECF and SECG respectively.

I-beam is mainly divided into ordinary I-beam, light I-beam and low alloy light I-beam. Ordinary I-beam and light I-beam flanges are thick on the web plate and thin on the outside. Ordinary I-beam, light I-beam, because the cross-sectional dimensions are relatively high, narrow, so the section of the two main sleeve moment of inertia difference is large, which makes it in the scope of application has a great limitation. The use of I-beam shall be selected according to the requirements of the design drawings.

H-beam is a new type of steel for economic construction. H-beam has economical and reasonable cross-sectional shape, good mechanical properties, uniform extension of each point on the cross-section and small internal stress during rolling. Compared with ordinary I-beam, H-beam has the advantages of large cross-sectional modulus, light weight and metal saving, which can reduce the building structure by 30-40%. In addition, because its legs are parallel to the inner and outer sides and the leg ends are right angles, the welding and riveting work can be saved by 25%. It is often

Flat steel,refers to 12-300mm wide,3-60mm thick,rectangular section and slightly with a blunt edge of steel.Flat steel can be finished steel,can also be used as a blank for welding pipe and thin slab for rolling sheet.Main uses:flat steel as a finished material can be used for hoop iron,tools and mechanical parts,as building frame structure,escalator.

Channel steel is a long strip of steel with a groove-shaped section, which is a carbon structural steel for construction and machinery. It is a section steel with a complex section, and its section shape is groove-shaped. Channel steel is mainly used for building structure, curtain wall engineering, mechanical equipment and vehicle manufacturing.

Angle steel, commonly known as angle iron, is a long strip of steel with two sides perpendicular to each other. Angle steel can be composed of different force components according to the different needs of the structure, and can also be used as a connector between components. Widely used in various building structures and engineering structures, such as beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, bus support installation, and warehouse shelves.

Product Name：Carbon steel wire rod
Diameter： 0.15-16.00mm
Material：SAE1006 1008 1010 1022 Carbon steel
MOQ：1 ton , We can accept sample order.
Product type：Plain round/Twisted

Export packing ：Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Standard：GB4357,DIN17223,JIS G 3521 , EN10270-1
Surface treatment：Custom Made,Black,Polishing,Mirror A/B,Lusterless,Acid Washing,Varnish Paint
Delivery time： 7-10 days after receive the deposit.
Technology: cold drawn, cold rolled, hot rolled.
Main application : making spring,mattress,wire rope, brush, cable
DIN :The customer request
Production :capital 150 TON/day 5000 TON /month

Steel Grade：Q195,Q235,Q345,45#, S20C, SAE1010,SAE1020.SAE1045,EN8,EN 19fC45,CK45,SS400 etc
Standard：ASTM A615Gr40/60,BSS4449 Gr460B,500B etc.
Diameter: 6mm-1200mm.
Length: 3000mm-12000mm or as client's request
Tolerance: +0.5mm/-0(dia),+5mm/-0(L)
Heat treatment: Normalized / Annealed / Quenched / tempered
Surface: black,mill,polished,brush,etc
Test: Ultrasonic test according to SEP 1921-84 G3 C/c
Application: Widely used in construction industry for reinforcing concret(Express way; office building, Bridge etc) Trasportation By sea(20' 40' container), parts of larger cross-sections, crankshafts, gears.

Product Name : Carbon Steel Pipe
Material: A53 Gr.B,A36,ST52,ST35,ST42,ST45,X42,X46,X52,X60,X65X70
Standard： API 5L,ASTM A106 Gr.B,ASTM A53 Gr.B,ASTM A179/A192,ASTM A513,ASTM A671,ASTM A672,BS EN 10217,BS EN10296,BS EN 39,BS6323,DIN, EN10217
Certificates ：API 5L,ISO9001,SGS,BV,CCIC
Outer Diameter ：15mm-1200mm
Length :1m,4m,6m,8m,12m according to buyer's request
Surface Treatment :black paint,varnish,oil,galvanized,anti-corrosion coated
Marking: Standard marking,or according to your request.Marking Method:Spray white paint
End Treatment: Plain End/Bevelled End/Grooved End/Threaded End With Plastic Caps

​Standard ：ASTM EN DIN GB ISO JIS BA ANSI
Steel Grade： Q195, Q215,Q235,Q345,ST37, A36,45# ,16Mn, SPHC,SGCC,CGCC
Thickness：0.2-100mm or Customized
Width ：1250-2500mm,or as Your Request ( regular width 1000mm, 1250mm, 1500mm )
Coil ID ：508mm or 610mm
Coil Weight ：3 - 8 ton or as Your Request
Technique： Hot rolled cold rolled as Your Request
Surface ：Treatment Bare,Black,Oiled,Shot Blasted,Spray Paint,Coated,Galvanized,or as Your Request
Package ：Standard Export packing(Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet)

Carbon steel, on the other hand, has far lower chromium levels, and is instead a carbon-iron alloy with only a few other materials, if any, as part of its makeup. As a result, it can be referred to as ‘low-alloy’ steel. Both stainless steel and carbon steel feature this basic composition, but carbon steel can be defined by its carbon content. This is normally around 2-2.5%, however this often varies. Though susceptible to rust unlike stainless steel, carbon steel is often cheaper and has its own varying mechanical properties based on carbon content.

Material ：BS4449, Gr460B,Gr500B, GB1449.2, HRB335, HRB400, HRB500,HRB400E,HRB500E, ASTM A615, GR40/GR60/GR75, JIS G3112,SD390,SD360 KoreaStandarsKS D 3504 SD400 SD500 SD600, AustralasianStandard GR500N
Size：6mm,8mm,10mm, 12mm, 13mm, 14mm, 16mm, 20mm, 22mm, 25mm, 30mm, 32mm, 40mm,50mm
Length： 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard: BS4449-2005,GB1449.2-2007,JIS G3112-2004, ASTM A615-A615M-04a,Korea StandarsKS D 3504, AustralasianStandard AS/NZS 4671
Grade: Grade A, Grade B, Grade C
Section Shape ： Spiral Shape,Herringbone Shape,Crescent Shape
Technique: Steel Rebar Iron Rod
Packing :Bundle, or with all kinds of colors PVC or as your requirements Ends Plain end/Beveled,protected by plastic caps on both ends, cut quare,grooved,threaded and coupling,etc.

Thickness: 0.1-400mm，etc
Length: 100-12000mm，or as your requirement
Width: 20-3000mm，or as your requirement
Standard: ASTM，AISI，JIS，GB， DIN，EN
Certification: ISO, CE
Surface finish: mill,bright,polished,hair line,brush,sand Blast,checkered,embossed,etching,etc
Packing: standard export packing (inside:water proof paper,outside:steel covered with strips and pallets)
Temper: H12, H14, H16, H18, H20, H22, H24, H26, H28, H32, H36, H38, HO, H111, H112, H114, H116, H118, H321.
Container size: 20ft GP: 5898mm(Length) x 2352mm(Width) x 2393mm(High)40ft GP: 12032mm(Length) x 2352mm(Width) x 2393mm(High)40ft

Item: Aluminum roofing sheet/aluminum corrugated sheet 1000-8000 alloy
Thickness: 0.6mm-2mm or as required
Length: 500mm-1m or as required
Surface Treatment: O-H112
Color: Aluminum color or RAL color coated
MOQ: 10tons.We also can accept sample order.
Capacity: 200,000 tons/year
Shipment time: Within 10-20 workdays after receiving deposit
Standard: ASTM,DIN,JIS,BS,GB/T
Certificate: ISO,CE, SGS,BV,BIS
Weight Calculation: Weight(kg)= Thickness(mm)* Width(m)* Length(m)* Density (2.71g/cm3)
Trade Term: FOB,CIF,CFR,EXW,etc.
Price Term: T/T,L/C,Western Union,Paypal,Apple Pay,Google Pay,D/A,D/P,MoneyGram